Pramac Ac03 Manual Link

: Allows users to toggle between OFF , MAN , AUT (Automatic), and TEST modes.

Inhibits the engine from running entirely. This mode is necessary for safety during maintenance or prolonged non-use.

"The AC03 runs for 10 minutes then dies." Manual solution: Check the fuel cap vent. If the little screw knob is closed (vacuum lock), fuel stops flowing. Open the vent. pramac ac03 manual

3-phase AC input (up to 500V phase-to-phase).

The controller will now sit in standby mode. It will start automatically when the external contact closes and stop when it reopens. 4. Programming and Parameter Configuration : Allows users to toggle between OFF ,

mode. They initiate the engine's start sequence or stop the generator set. Fault Reset : Used to acknowledge active alarms and silence the horn.

Always perform standard pre-start checks (oil level, fuel levels, and coolant levels) before operating the machinery. Manual Starting Sequence "The AC03 runs for 10 minutes then dies

: Configuring binary and analog inputs for external sensors or remote alarms. Protection Settings : Managing Earth Fault Current Protection

: A critical safety button used to acknowledge alarms (one press) and clear inactive fault signals (two presses).