Plug the USB drive into the front or rear USB port of the HT-R695. Press the button on your remote. Navigate to Hardware Setup -> Firmware Update . Select Update via USB . Press Enter . The system will verify the files on the drive. Select Update to begin the process. Wait until the front panel reads "Completed!" .
Select "Hardware Setup" → "Firmware Update" . Select Update Method: Choose "Update via NET" .
Improves system reliability for Chromecast built-in , AirPlay , and local FLAC audio file decoding.
| Issue | Likely Cause | Solution | |--------|---------------|-----------| | “Update via NET” greyed out | No network connection or server down | Use USB method instead | | Update freezes at 0% or 99% | Corrupt download or power glitch | Power cycle (unplug 1 min), retry via USB | | “USB device not supported” | Wrong format or folder structure | FAT32; root must contain HTR695 folder | | Receiver doesn’t recognize USB | Drive too large or high power draw | Try 4GB USB 2.0 drive | | After update, no sound | Settings reset to defaults | Re-run AccuEQ, check speaker config | | HDMI ARC stopped working | CEC/ARC settings reset | Turn off all devices → Enable HDMI CEC + ARC in setup | | Wi-Fi credentials lost | Update clears network settings | Re-enter Wi-Fi password | onkyo ht-r695 firmware update
Occasionally, manufacturers unlock new audio decoding formats or smart home integrations through late-stage firmware releases. Critical Pre-Update Checklist
When the screen displays a new update is available, select . The display will show "Status: xx%" or a progress bar. Do not touch the receiver or turn it off during this time.
After updating, navigate to Setup → 7. Miscellaneous → Firmware Update to see your current 12-digit firmware number. Compare it to the latest version on Onkyo's support page to ensure you're up to date. Plug the USB drive into the front or
Copy all the extracted files directly to the (the main folder) of your USB drive. Do not put them inside a folder.
Before updating, confirm what firmware is installed.
Press . The receiver will automatically check for the latest available version on Onkyo's servers. Select Update via USB
Note: Do not turn off the power until the front display shows "Complete". :
Turn off HDMI CEC / HDMI Control settings via the system configuration menu.