Wedo Paket 50 User Manual Here

This article consolidates the most requested information from the original , including installation steps, wiring diagrams, LED status codes, and software access. While we strongly advise keeping the printed manual that came with your unit, this guide will help you get back on track if it’s lost.

Navigate to the tab on the left-hand dashboard menu. Click on Batch Initialization .

(typically included) or batteries (1 x 9V block or 4 x 1.5V AAA depending on the model). WEDO | Werner Dorsch GmbH Operating Instructions : Place the scale on a stable, level surface. Powering On

The Wedo Paket 50 offers flexibility regarding power.

💡 Tip: The top cover has a small label showing default IP address (usually 192.168.1.50). wedo paket 50 user manual

Use the HOLD function to keep the weight on the display after the package is removed, or MEMORY to store values for cumulative weighing.

Stainless steel weighing plate for durability and easy cleaning.

Place the scale on a stable, flat, and vibration-free surface.

For specific details, features, and the most accurate information, I recommend consulting the actual manual provided with the WeDo Paket 50 or visiting the official LEGO Education website. Click on Batch Initialization

: The display shows "EEEE" or Error. Solution : This usually indicates an overload. Remove weight immediately. The maximum capacity is 50 kg.

Unlike simpler PLCs, the WeDo Paket 50 supports and IEC 61131-3 (Structured Text) via the optional “WeDo Studio” software (available from the manufacturer’s support portal). The user manual explains:

: Plug the included mains adapter into the display unit or insert a 9V block battery (for the standard model) or 4 x 1.5V AAA batteries (for the "Plus" model) for portable operation. Display Placement

Ensure students return all pieces to the correct tray slots. Powering On The Wedo Paket 50 offers flexibility

Ensure the scale is on a flat, vibration-free surface. Check if any debris is stuck under the weighing plate. Display Issues:

Press the button. A beep or icon will indicate the weight is locked.

Open the app, and turn on your Smart Hub. The app should automatically find the Hub. If not, click on the connection icon and select your Hub (identified by a unique color combination). 4. Programming the WeDo 2.0 Hub

Release both buttons. The display will show "CAL" followed by the required calibration weight (e.g., "20.00 kg").